Due to the characteristics of low-pressure casting process, different types of defects such as cracks, inclusions, shrinkage, porosity, etc.
Cannot be avoided, and the resulting defective products account for more than 90% of the whole unqualified products, so the existence of these defects affects the qualification of the wheel, and the use of detection means to detect the qualification of the wheel has become an indispensable part of the wheel casting industry.
JWHEEL uses nondestructive detection methods, usually X-Ray inspection is the first process after the low pressure casting wheel is formed, and it is used to detect the above internal casting defects to prevent the defective products from continuing the subsequent process and wasting resources.
The X-Ray inspection is used to detect these internal casting defects as the first process after the low-pressure casting wheel, so as to avoid the waste of resources in the subsequent process.